Setting Up a Session
STEP 1: Create the Mixing Bus
Figure 5 – 27 | Create the Mixing Bus in Pyramix via the Mixer Wizard
Go to Project Menu / New / (…)Use Mixer Wizard(…) / (…)Create Some Busses(…)
Create a new project and select the Mixer Wizard option.
OR
Go to Mixer Window / Organise Tab / Wizard… / (…)Create Some Busses(…)
Add a new Mixing Bus via the Mixer Wizard in an existing project.
The AURO-3D Export plugin supports the following formats:
• Auro 13.1: Support for Auro 13.1, Auro Encoded 7.1 and Auro Encoded 5.1 input formats.
• Auro 11.1 (7+4): Support for Auro 11.1 (7.1+4H), Auro Encoded 7.1 and Auro Encoded 5.1 input formats.
• Auro 11.1: Support for Auro 11.1, Auro Encoded 7.1 and Auro Encoded 5.1 input formats.
• Auro 10.1: Support for Auro 10.1, Auro Encoded 7.1 and Auro Encoded 5.1 input formats.
• Auro 9.1: Support for Auro 9.1 and Auro Encoded 5.1 input formats.
• Dolby 7.1.4: Support for Auro 11.1 (7.1+4H), Auro Encoded 7.1 and Auro Encoded 5.1 input formats.
• Dolby 7.1.2: Support for 7.1.2, Auro Encoded 7.1 and Auro Encoded 5.1 input formats.
• Dolby 5.1.4: Support for Auro 9.1, and Auro Encoded 5.1 input formats.
• Dolby 5.1.2: Support for 5.1.2, Auro Encoded and 5.1 input formats.
• 7.1: Support for Surround 7.1, Auro Encoded 7.1 and Auro Encoded 5.1 input formats.
• 7.0: Support for Surround 7.0, Auro Encoded 7.0 and Auro Encoded 5.0 input formats.
• 5.1: Support for Surround 5.1 and Auro Encoded 5.1 input formats.
• 5.0: Support for Surround 5.0 and Auro Encoded 5.0 input formats.
Note that a Dolby 7.1.2 format is automatically upmixed to an Auro 11.1 (7.1+4H) Format when applying the Monitor Options Encoded, Binaural or Stereo Downmix.
Note that a Dolby 5.1.2 format is automatically upmixed to an Auro 9.1 Format when applying the Monitor Options Encoded, Binaural or Stereo Downmix.
STEP 2: Configure the Mixing Bus I/O
Figure 5 – 28 | Mapping each audio channel to the corresponding hardware output in Pyramix
Go to Mixer Window / Mixing Bus Track / Connect Output Module.
At the bottom of the Mixing Bus track in the Mixer Window, connect each audio channel to the corresponding hardware output.
Mixing in 3D
STEP 1: Insert the AURO-3D Export Plugin on the Mixing Bus Track
Figure 5 – 29 | Inserting the AURO-3D Export Plugin in the Mixing Bus Track in Pyramix
The AURO-3D Export Plugin treats all audio channels at the very end of the audio chain.
STEP 2: Start Panning Audio Sources
Figure 5 – 30 | Panning Audio Sources in Pyramix
Simply use the panners natively provided by the DAW to pan the audio sources in 3D.
Make sure that the track format and output module of the audio track are properly configured.
Note that it is perfectly possible to pan a mono, stereo or surround source.
STEP 3: Listen to the Different Versions of the Mix
Figure 5 – 31 | Monitor Drop Down Menu of the AURO-3D Export plugin in Pyramix
While mixing, the AURO-3D Export plugin lets you:
• Listen to a Binaural Version of your mix using Auro-Headphones technology. (Free)
• Listen to a Stereo Downmix version of your mix. (Free)
• Listen to an Auro-Codec encoded version of your mix using the Auro-Codec Encoder. (Auro-Codec Encoding License Required)
• Decode Auro-Codec Encoded content using the Auro-Codec Decoder. In that case, the AURO-3D Export plugin should not be inserted on the master track but directly on the audio track containing the Auro-Codec encoded content instead. (Auro-Codec Encoding License Required)
It is recommended to decode Auro-Codec Encoded contents in relevant track formats. Examples:
• 7.1 interleaved file that carries Auro 11.1 (7.1+4H) Encoded content should ideally be decoded in an Auro 11.1 (7+4) track format.
• 7.1 interleaved file that carries Auro 13.1 Encoded content should ideally be decoded in a Auro 13.1 track format.
• 5.1 interleaved file that carries Auro 9.1 Encoded content should ideally be decoded in a Auro 9.1 track format.
• 5.1 interleaved file that carries Auro 11.1 Encoded content should ideally be decoded in a Auro 11.1track format.
STEP 4: Export Your Mix
In order to export your mix, you can:
• Use the bounce options natively provided by the DAW to export your Immersive Mix, Binaural Mix or Stereo Downmix. (Free)
• Configure the Auro-Codec Encoder and export your encoded mix using the Auro-Codec Encoder Export Button. (Auro-Codec Encoding License Required)
